01Controller and four-drive relationship
Identify the host bus adapter, motherboard or backplane on the SFF-8643 side and the four intended SATA devices.
CABLE ASSEMBLY RFQ · DRAWING AND SAMPLE CHECK
EndpointsApplication
Drawing / sample
Mini SAS HD SFF-8643 to 4 SATA Cable Assemblies
Send the controller or backplane model, forward or reverse direction, SATA plug angle, branch length and quantity. We confirm the port layout before quotation.
EndpointsApplicationDrawing / sample
REAL RFQ INPUTSConnector, route, length and quantity are checked before quoting
Why review mattersSFF-8643 to four SATA cables can look nearly identical while using opposite breakout direction, different port order or incompatible exit geometry. Host and target roles must be explicit.
WHAT THIS PAGE COVERS← View the Mini SAS HD family
A four-SATA breakout route—without assuming direction
Our catalog includes Mini SAS HD SFF-8643 to four SATA under references P04-006 and P04-010. They do not prove forward or reverse direction, universal port mapping, plug orientation, data rate, length or platform compatibility.
Product familyMini SAS HD
Endpoint combinationSFF-8643 → 4 SATA
Catalog referencesP04-006 · P04-010
RFQ basisQuoted for your project
COMPATIBILITY REVIEW
Six inputs that prevent a four-SATA breakout mismatch
Partial information is welcome. Unknown direction, port order or mechanical details become explicit review questions before quotation.
0102Exact SFF-8643 mating interface
Provide the controller or backplane reference, connector orientation, keying, platform photos or drawings where available.
03Forward or reverse breakout
State which side is the host and which side connects to target devices. We do not assume breakout direction from connector names.
04SATA port order and target plugs
Identify the four target connections, required SATA plug form and any controller-to-port numbering or lane-order requirement.
05Exit angle, branch length and routing
Share SFF-8643 exit direction, straight or angled SATA plugs, branch lengths, bend constraints and available chassis clearance.
06Quantity and project stage
Provide prototype quantity, forecast and whether the project is at design, validation, pilot or production stage.
COMMON WRONG-PURCHASE RISKS
Matching connector names do not prove the correct breakout
The usable assembly depends on the controller-to-drive direction, approved port mapping and physical installation path.
Forward and reverse confused
The cable is wired for the opposite host-to-target direction required by the controller or backplane.
SATA port order assumed
The four target devices are connected in an order that does not match controller numbering or platform documentation.
Wrong SATA plug orientation
Straight, left-angle or right-angle SATA plugs conflict with the drive position or adjacent hardware.
Exit angle or branch length missed
The SFF-8643 exit, branch routing or bend path interferes with cards, fans, drive bays or panels.
HOST-TO-DRIVE DIRECTION FIRSTController or backplaneFour SATA target devicesForward / reverse evidenceDrawing, photo or sampleGet an SFF-8643 to 4 SATA Quote →
Show which end controls the four SATA devices
Tell us whether the SFF-8643 side connects to a controller or backplane, what the four SATA plugs connect to, and how each branch must route. A platform block diagram, controller manual or existing cable label can resolve direction and port order quickly.
Controller or backplaneFour SATA target devicesForward / reverse evidenceDrawing, photo or sampleAFTER YOU SUBMIT
Direction and port-order review before quotation
01
Tell us what you have
We start with the controller, four targets, quantity and available reference material.
02
Direction and mapping review
Clarify forward or reverse breakout, SATA port order, plug orientation and branch routing.
03
Factory coordination
We coordinate the clarified configuration with a suitable factory.
04
Quotation or sample
We then recommend a quote or sample step that fits the project stage.
RELATED MINI SAS HD CONFIGURATIONS
Continue from the actual target endpoint
If four SATA targets are not the real requirement, use the U.2 or OCuLink route instead of forcing this breakout configuration.
FROM ROUGH INFORMATION TO A QUOTABLE CABLE
Send the drawing, photo, sample label or equipment model. We will check the missing details before quoting.
01Endpoints02Check
03Build route
04QuoteBUYER DECISION GUIDE
Before you request this cable, check these items
This section is for purchasing and engineering teams that have a real project, but may not yet have a complete drawing or final part number.
When this cable is worth quoting
Use this RFQ route when the request calls for Mini SAS HD SFF-8643 to 4 SATA Cable Assemblies, or when the connector combination looks close but the host, target, direction, length or installation space still needs to be confirmed.
Most common wrong order
Forward/reverse direction and exit angle are common failure points. A connector photo or marketplace title is not enough. The cable must match the equipment path and wiring direction.
Typical use cases
- Storage controller to drive breakout projects
- Server repair or replacement where direction is unclear
- Volume sourcing for systems with defined SATA branch layout
Send these first for a faster quote
- Host equipment and target equipment
- Connector photos, drawing, existing sample or part number
- Required length, quantity and project stage
- Inspection, compliance, labeling or packaging needs
If the specification is unclear
Do not guess the connector family. Send what each end connects to, what the cable must do, and which detail is uncertain. We will reply with the exact items that need checking before quote.
Start with a short message
Email, product/application and a short requirement are enough to open the RFQ. Drawings, photos or samples can be added later.
Request Mini SAS HD Quote →HOW WE WORK
From your RFQ to a cable ready to ship
One clear OEM/ODM cable project path—from your requirement through engineering, sample approval and production.
01
Send RFQ
Share your cable idea.
02
Engineering Review
Confirm fit and details.
03
Drawing & Quote
Approve scope and price.
04
Prototype
Build and validate samples.
05
Mass Production
Manufacture the approved cable.
06
Inspect & Ship
Check, pack and deliver.
Quick collaboration guideWhat happens on each side
| Stage | You provide | We coordinate | Result |
|---|---|---|---|
| 01 · Start | Application, equipment, connector photo or drawing | Review the requirement and list missing details | Clear RFQ scope |
| 02 · Develop | Answer technical questions and approve the sample | Coordinate drawing, quotation and prototype | Approved cable specification |
| 03 · Deliver | Release PO and confirm shipping information | Manage production, inspection, packing and shipment | Finished goods and documents |